APPLICATION OF 5S+SAFETY METHOD IN PRODUCTION DEPARTMENT OF SUGAR FACTORY

Alifa Permata Dewi; Ira Promasanti Rachmadewi; Qurtubi; Devina Inayah Iryani

doi:10.33506/mt.v10i2.3133

Authors

Alifa Permata Dewi Universitas Islam Indonesia
Ira Promasanti Rachmadewi Universitas Islam Indonesia
Qurtubi Universitas Islam Indonesia
Devina Inayah Iryani Universitas Islam Indonesia

DOI:

https://doi.org/10.33506/mt.v10i2.3133

Keywords:

Ergonomics, Occupational health and safety, 6s

Abstract

PT. PQR is a sugar factory company whose facilities are distributed unevenly throughout the factory, making the workers in the production division not very clean and organized. The research aims to identify problems in the work environment and provide suggestions regarding the issues found. Therefore, a method is needed to determine the work environment, namely 5S+Safety, using tools like a 6S assessment form for each aspect. The results obtained were 2.808, which means that the activities needed to be carried out more, and only a tiny part of the 6S was carried out. For short, with a value of 1.75; for set in order, with a value of 2.4; for shine, with a value of 2.8; for standardize, with a value of 3.2; for sustain, with a value of 3.4; and finally safety, with a value of 3. This research was used to determine the cultural conditions and work environment that can be used as evaluation material for this company to create a clean, comfortable, and safe work environment.

References

Akhriyani, L., Herwanto, D., & Angelia, F. (2021). Analysis of the 6s Assessment Score in the Workplace of UKM Suci Rizki Bekasi. Jurnal Teknovasi, 08(01), 13-18.

Devani, V., & Fitra, A. (2016). Analisis Penerapan Konsep 5S di Bagian Proses Maintenance PT. Traktor Nusantara. Jurnal Teknik Industri, 112.

Heruwanto, J., Septian, D., & Kurniawan, E. N. (2018). PENGARUH MOTIVASI DAN LINGKUNGAN KERJA TERHADAP KINERJA KARYAWAN PT. PUTRA TARO PALOMA BOGOR. Jurnal Manajemen Kewirausahaan Vol. 15 No. 02, 180.

Kristyanto, A., & Kusdiartini, V. (2021). PERENCANAAN BUDAYA 5S (SEIRI, SEITON, SEISO, SEIKETSU, SHITSUKE) PADA ANOEGRAH JAYA MOTOR SEMARANG. JEMAP: Jurnal Ekonomi, Manajemen, Akuntansi, dan Perpajakan, 164.

Perdana, A. H., Hidayah, R. N., Rahajeng, D. P., Yudistira, G. A., & Basumerda, C. (2022). Analisis 6S untuk Continuous Improvement pada Lingkungan Kerja Bengkel Yogyakarta. Seminar dan Konferensi Nasional IDEC, A03.2.

Pramudian K., N., & Susanto, N. (2019). Analisis Penerapan Metode 5S pada Warehouse Fast Moving PT. Indonesia Power UBP Mrica Kabupaten Banjarnegara. Performa: Media Ilmiah Teknik Industri, 18(1), 28-53.

Putra, A. B., & Aryanny, E. (2024). PENERAPAN KONSEP “5S” UNTUK MENCIPTAKAN LINGKUNGAN KERJA YANG ERGONOMIS DI PT. SRI YOGYAKARTA. Scientica, 2(1), 337.

Setiawan, A. (2020). PENGARUH PROGRAM QUALITY CONTROL CIRCLE (QCC) DAN KONSEP KERJA 5S TERHADAP PRODUKTIVITAS KERJA KARYAWAN PT YUPI INDO JELLY GUM, BOGOR. Jakarta: SEKOLAH TINGGI ILMU EKONOMI IPWI JAKARTA.

Setiawan, A. I. (2018). ANALISIS PERBAIKAN KONDISI KESELAMATAN KERJA DENGAN METODE 6S DI INDUSTRI UMKM PENGOLAHAN SUSU (STUDI KASUS : CV. SAHABAT TERNAK). Yogyakarta: UNIVERSITAS ISLAM INDONESIA.

Setyorini, W., & Subagiyo, D. J. (2021). PENGARUH LINGKUNGAN KERJA DAN KOMPENSASI TERHADAP KEPUASAN KERJA KARYAWAN PABRIK TAHU SUMBER SARI PANGKALAN BUN. Magenta, 10(1), 9-22.