Analysis of Work Accidents in Refurbish Cranes Using the HAZOP Method Approach

Marulan Andivas; Wahyu Ismail Kurnia; Putri Nuvira Mada; Novia Febryantri Wahono; Agus Hindarto Wibowo5

doi:10.33506/mt.v10i1.3000

Authors

Marulan Andivas Program Studi Teknik Industri, Fakultas Teknologi Industri, Universitas Balikpapan
Wahyu Ismail Kurnia Universitas Balikpapan
Putri Nuvira Mada Program Studi Teknik Industri, Fakultas Teknologi Industri, Universitas Balikpapan
Novia Febryantri Wahono Program Studi Teknik Industri, Fakultas Teknologi Industri, Universitas Balikpapan
Agus Hindarto Wibowo5 Teknologi Industri, Program Pendidikan Vokasi, Institut Sains dan Teknologi AKPRIND

DOI:

https://doi.org/10.33506/mt.v10i1.3000

Keywords:

HAZOP, K3, Refurbish Crane

Abstract

Currently, Indonesia has a fairly high number of accidents. According to BPJS Employment for 2018 - 2022, work accident cases are starting to increase There were (265,334) cases of work accidents recorded in Indonesia in 2022, an increase of around 13.26% from the previous year of (234,270) cases. K3 is a factor that functions to reduce the number of work accidents, as well as supporting the smooth production process, so it must be determined in each agency PT. X is a company engaged in the fields of manufacturing, design, supply, installation, steel fabrication, service, refurbish, remanufacturing equipment and components or parts for mining, gas and oil and other general industries. Work accidents were found in the product support section, such as being pinched and crushed. In this research, we analyze the potential for work accidents using the HAZOP method in the crane refurbishment process which has a risk of work accidents. The attitude of workers at PT. X has 10 activities with potential and risk of danger where there are 3 levels of danger in the extreme category, 5 levels of danger in the high category, 2 levels of danger in the medium category, and 12 levels of danger in the low category.

References

Andivas, M., Harits, D., Wibowo, A. H., Thoriq, E. A., & Ghazali, I. (2023). The Mental Workload Analysis on Female Educators During Covid-19 Pandemic Using Nasa-TLX Method. Spektrum Industri, 21(1), 32–40. https://doi.org/10.12928/si.v21i1.87

Arifin Wagiman, M., Yuamita, F., Yogyakarta Jl Siliwangi Jl Ring Road Utara, T., Lor, J., Mlati, K., Sleman, K., & Istimewa Yogyakarta, D. (2022). Analisis Tingkat Risiko Bahaya Kerja Menggunakan Metode Hazop (Hazard And Operability) Pada PT Madubaru PG/PS Madukismo. Jurnal Teknologi Dan Manajemen Industri Terapan (JTMIT), 1(4), 277–285.

Astrie Anggraini, D., Firmansyah, W., Tuanku Tambusai Ujung, J., Komersil Arengka, S., & Tampan, K. (2019). Analisis Risiko Kecelakaan Kerja CV.Mitra Kreasi Utama Dengan Menggunakan Metode HAZOP (Hazard and Operability Study). Desember, 6(1), 13–20.

Febriana Sulistya Pratiwi. (2023, April 28). RI Alami 265.334 Kasus Kecelakaan Kerja hingga November 2022. DataIndonesia.Id.

Hakim, D. F., & Adhika, T. (2022a). Analisis Keselamatan dan Kesehatan Kerja (K3) dengan Menggunakan Metode Hazard and Operability (Hazop) pada Bengkel Motor. Jurnal Syntax Admiration, 3(12), 1534–1543. https://doi.org/10.46799/jsa.v3i12.519

Hakim, D. F., & Adhika, T. (2022b). Analisis Keselamatan dan Kesehatan Kerja (K3) dengan Menggunakan Metode Hazard and Operability (Hazop) pada Bengkel Motor. Jurnal Syntax Admiration, 3(12), 1534–1543. https://doi.org/10.46799/jsa.v3i12.519

Haslindah, A., Andrie, A., Nur Hidayat, F., & Aryani, S. (2020). Penerapan Metode HAZOP Untuk Keselamatan Dan Kesehatan Kerja Pada Bagian Produksi Air Minum Dalam Kemasan Cup Pada PT. Tirta Sukses Perkasa (CLUB). Journal Industrial Engineering and Management (JUST-ME), 1(01), 20–24. https://doi.org/10.47398/justme.v1i01.5

Mangkay, S. D., Baali, Y., Fernando Sembel, H., & Surya, W. S. (2022). IMPLEMENTASI METODE HAZOP (HAZARD AND OPERABILITY STUDY) PADA PROSES PRODUKSI DI BALAI LATIHAN PENDIDIKAN TEKNIK TOMOHON. 6(3), 2439–2433.

Mindhayani Iva. (2020). ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA DENGAN METODE HAZOP DAN PENDEKATAN ERGONOMI (STUDI KASUS: UD. BAROKAH BANTUL). Jurnal Simetris, 11(1), 31–38.

Namangge, S., Punuhsingon, C. S. C., & Neyland, J. S. C. (2023). ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA (K3) PADA PERUSAHAAN BONGKAR MUAT MENGGUNAKAN METODE HAZARD AND OPERABILITY STUDY (HAZOP). 9(2), 121–130. https://ejournal.unsrat.ac.id/v3/index.php/jtmu

Nur, M. (2018). Analisis Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard And Operability Study (HAZOP) Di PT. XYZ. In Jurnal Teknik Industri (Vol. 4, Issue 2).

Oktavia, S., Ningsih, D., & Hati, S. W. (2019). ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA (K3) DENGAN MENGGUNAKAN METODE HAZARD AND OPERABILITY STUDY (HAZOP) PADA BAGIAN HYDROTEST MANUAL DI PT. CLADTEK BI METAL MANUFACTURING. In Journal of Business Administration (Vol. 3, Issue 1). www.bpjsketenagakerjaan.go.id

Purwanto, E. B. I., Dharma Widada, & Willy Tambunan. (2023). Analisis Risiko K3 pada Bongkar Muat di Pelabuhan dengan Metode HAZOP (Hazard Analysis and Operability Study) (Studi Kasus : PT. XYZ). JOURNAL OF INDUSTRIAL AND MANUFACTURE ENGINEERING, 7(2), 180–191. https://doi.org/10.31289/jime.v7i2.9803

Rahmanto, I., & Hamdy, M. I. (2022). Analisa Risiko Kecelakaan Kerja Karawang Menggunakan Metode Hazard and Operability (HAZOP) di PT PJB Services PLTU Tembilahan. Jurnal Teknologi Dan Manajemen Industri Terapan (JTMIT), 1, 53–60.

Rais Budiman, M., & Suseno, A. (2022). Identifikasi Potensi Bahaya untuk Meminimalkan Kecelakaan Kerja dengan Metode Hazard and Operability Study (HAZOP) di PT SEGARA. Jurnal Ilmiah Wahana Pendidikan, 8(9), 333–339. https://doi.org/10.5281/zenodo.6668080

Restuputri, D. P., Prima, R., & Sari, D. (2015). ANALISIS KECELAKAAN KERJA DENGAN MENGGUNAKAN METODE HAZARD AND OPERABILITY STUDY (HAZOP).